Ascender 2WD L6-4.2L (2003)
Center Mounted Brake Lamp: Customer Interest
Body - Center Mounted Stop Lamp Applique loose
TSB SB07-11-S012
Issue Date: SEPTEMBER 2007
Center High-Mount Stop Lamp (CHMSL) Appliqué Loose
This Bulletin Supersedes SB05-11-S001
Affected Vehicles
2003-2008 Isuzu Ascender
Service Information
This bulletin is being revised to include additional model years.
Condition:
Some customers may comment that the CHMSL applique is loose on the liftgate glass.
Cause:
A poor bonding of the double-sided adhesive tape between the CHMSL applique and the liftgate glass may cause this condition.
Correction:
Re-tape the CHSML applique to the liftgate glass.
Service Procedure
Re-tape the CHSML applique to the liftgate glass using the following service procedure:
1.
Open the liftgate glass.
2.
Remove the screws that retain the applique to the liftgate glass.
NOTICE:
Do not damage the applique or the liftgate glass when removing the applique from the liftgate glass.
3.
With a flat-bladed tool, carefully remove the applique from the liftgate glass.
4.
Remove the CHMSL harness grommet from the roof panel.
5.
Disconnect the CHMSL harness connector.
6.
Place a clean fender cover on a suitable working surface and place the applique on the fender cover.