Ascender 2WD L6-4.2L (2003)
Heated Glass Element: Technical Service Bulletins
A/C - Rear Window Defroster Grid Repair Information
TSB SB07-11-S013
Issue Date: SEPTEMBER 2007
Alternate Procedure For Reconnection Of Rear Window Defroster Contact Or Tab
This Bulletin Supercedes SB07-11-S008
Affected Vehicles:
2003-2008 Isuzu Ascender
Service Information
NOTE:
This bulletin is being revised to notify technicians that the preferred method of repair can be found in bulletin SB07-11-S014.
Repair Suggestion
Electrically conductive epoxy repair kits have been successful in reattaching the electric defroster tab to the rear glass as an alternative to rear window
replacement. Repair kits such as Kent Automotive P/N 57827-c and LOCTITE(TM) product # 21351 or equivalent are commercially available. By
following the manufacturers recommended repair procedure specified on the kit and properly preparing the bonding surface an effective repair may be
achieved.
In addition to the strength of the bond it is vital to strive for the best possible appearance. While it is unlikely that customers may refer to the appearance
of the rear window defroster and its components as a positive styling feature of the vehicle interior, it is easy to elicit the opposite reaction due to a poor
cosmetic application. If the tab (contact) is located in such a location or manner that an effective and attractive bond cannot be produced window
replacement is required and preferred.
Parts Information
Warranty Claim Information
Always refer to the Isuzu Service Policy Procedure Manual for specific details on warranty coverage and policies. Reference published Labor Time
Guide for claim processing, if applicable.
Disclaimer