isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Ignition System - New Spark Plugs and Gapping|Page 1963 > < Number One Cylinder|Locations
Page 1
background image

Spark Plug: Technical Service Bulletins
Ignition System - New Spark Plugs and Gapping

Information IB05-01-S003 

New Spark Plugs and Gapping

Light Duty ASCENDER 2003 Information ENGINE 03/01/05
Light Duty ASCENDER 2004 Information ENGINE 03/01/05

ISSUE DATE: MARCH 2005

Affected Vehicles
2003-2004 Isuzu Ascender (US) with 5.3L V-8 Engine (VIN P).

Service Information

A new spark plug has been released for use in the above vehicles. The new spark plug has an Iridium tip instead of the current Platinum tip. Due to the
different tip design, the gap of the spark plug has also changed. The new spark plug, P/N 8-12571-164-0 with AC Delco P/N 41-985, is gapped to 1.01
mm (0.040 inches) when the spark plug is made. The spark plug gap is set during manufacturing and should not be changed or damage to the spark plug
may result. Any new spark plug found not to be properly gapped should not be used.

Disclaimer

Ignition System - New Spark Plugs and Gapping|Page 1963 > < Number One Cylinder|Locations