isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Body - Doors Are Hard To Close|Page 7408 > < Body - Doors are Hard to Close|Page 7403
Page 1
background image

Front Door Striker: All Technical Service Bulletins
Body - Doors Are Hard To Close

TSB SB03-11-S002

Door Hard To Close (Adjust Striker)

ISSUE DATE: APRIL 2003

Affected Vehicles
2003 Ascender (US) Vehicles

Service Information

Condition:
Some customers may comment that one or more of the doors may be hard to close.

Possible Cause: 
The door striker may be out of adjustment.

Correction:
Adjust door striker

Service Procedure

1.

Open the door.

2.

Remove the lock striker from the door pillar (see figure 1).

3.

Close the door with the lock striker removed.

4.

Verify proper door and weatherstrip fit, by referring to the service manual.

5.

Reinstall the lock striker on the door pillar and tighten screws only until the screws are flush to the lock striker plate, but still allowing the striker
to move.

Body - Doors Are Hard To Close|Page 7408 > < Body - Doors are Hard to Close|Page 7403