Ascender 4WD V8-5.3L (2004)
Cargo Cover: All Technical Service Bulletins
Interior - Cargo Cover Handle Broken
TSB SB05-11-S010
Cargo Cover Handle Broken
ISSUE DATE: JUNE 2005
Affected Vehicles
2004-2005 Isuzu Ascender (UT)
Service Information
Condition:
Some customers may comment that the cargo cover handle is broken. Returns have shown that the handle may be fractured at the locating pins.
Correction:
Replace Cargo Cover Handle.
DO NOT REPLACE THE CARGO COVER.
Service Procedure
Use the following steps to replace the cargo cover handle:
1.
Using a flat-bladed tool, depress the two tabs that retain the handle to the cargo cover.
2.
Remove the handle from the cargo cover.
3.
Install the new handle to the cargo cover. Be sure that the two retaining tabs are released to secure the handle in position.
Parts Information
Warranty Claim Information