isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

ABOUT US
SIR Disabling and Enabling Zones|Page 7711 > < SIR Disabling and Enabling Zones|Page 7709

Ascender 4WD V8-5.3L (2004)

Page 3
background image

7. Remove the Connector Position Assurance (CPA) from both (2) electronic frontal sensor (EFS) connectors.
8. Disconnect both EFS connectors.

Enabling Procedure

1. Remove the key from the ignition.

2. Connect the EFS connectors to both (2) EFS's.
3. Install the CPAs to both EFS connectors.
4. Install sensor bracket to bumper.
5. Install the grille.

SIR Disabling and Enabling Zones|Page 7711 > < SIR Disabling and Enabling Zones|Page 7709