Ascender 4WD V8-5.3L (2004)
1. Locate the air flow direction arrow (2) on the MAF/IAT sensor.
2. Install the MAF/IAT sensor on to the air cleaner housing.
3. Tighten the clamp securing the MAF/IAT sensor to the air cleaner housing.
Tighten the clamp to ........7 N.m (62 lb in).
4. Install the air cleaner outlet duct.
5. Install the air cleaner outlet duct bolt.
Tighten the bolt to .........10 N.m (89 lb in).
6. Tighten the clamps at the MAF/IAT sensor and the throttle body.
Tighten the clamps to .......7 N.m (62 lb in).