Ascender 4WD V8-5.3L (2004)
Shift Cable: Service and Repair
Automatic Transmission Range Selector Cable Replacement
Automatic Transmission Range Selector Cable Replacement
Removal Procedure
1. Ensure that the vehicle is in the park position.
2. Raise the vehicle.
3. Remove the end of the range selector cable from the transmission range selector lever ball stud (6).
4. Remove the retainer (5) from the range selector cable.
5. Remove the range selector cable (4) from the bracket (1).
6. Remove the cable from the retainer (3) on the floor panel. If the vehicle is equipped with 4WD, remove the cable from the retainers located on the
transfer case.
7. Push the cable grommet (2) up through the floor panel.
8. Lower the vehicle.