Ascender 4WD V8-5.3L (2004)
Back Window Glass Weatherstrip: Service and Repair
Sealing Strip Replacement - Endgate Window - Outer
Removal Procedure
1. Lower the end gate window.
2. Remove the end gate window sealing strip by carefully pulling it straight up off the end gate pinch-weld flanges.
Installation Procedure
1. Install the end gate window sealing strip to the end gate.
2. Locate the integral clip on the sealing strip to the notch in the outer pinch-weld flange.
3. Seat the sealing strip onto the pinch-weld flanges starting in the center working outboard.