Axiom 2WD V6-3.5L (2002)
5. Remove fan guide(1), clips(3) on both sides and the bottom lock, then remove fan guide lower(3) with fan shroud(4).
6. Disconnect the reserve tank hose(4) from radiator.
7. Lift up and remove the radiator assembly with hose, taking care not to damage the radiator core with a fan blade.
8. Remove rubber cushions on both sides at the bottom.
Inspection
Radiator Cap
Measure the valve opening pressure of the pressurizing valve with a radiator filler cap tester.
Replace the cap if the valve opening pressure is outside the standard range.
Valve opening pressure kPa (psi): 93.3 - 122.7 (13.5 - 17.8)
Cap tester: J-24460-01
Adapter: J-33984-A
Check the condition of the vacuum valve in the center of the valve seat side of the cap. If considerable rust or dirt is found, or if the valve seat cannot
be moved by hand, clean or replace the cap.
