Axiom 4WD V6-3.5L (2004)
![background image](/isuzu/axiom_4wd/v6-3.5l/Page-1353001.png)
Front Door Exterior Handle: Service and Repair
Front Outside Handle
Removal
1. Disconnect the battery ground cable.
2. Remove the door trim panel.
-
Refer to Front Door Lock Assembly in this section.
3. Remove the waterproof sheet.
-
Taking notice of the door harness, peel the waterproof sheet off the door panel carefully.
4. Disconnect the locking links and remove the outside handle.
5. Remove the fixing clip to remove the door lock cylinder.
Installation
To install, follow the removal steps in the reverse order, noting the following points:
1. Be sure to install the door lock cylinder at a specified angle to the outside handle.
2. Check for smooth outside handle and lock cylinder operation.
3. Tighten the outside handle fixing bolts to the specified torque.
Torque: 7 N.m (61 lb. in)