Axiom 4WD V6-3.5L (2004)
Wheels: Technical Service Bulletins
Wheels - Vapor Chromed Finish Cleaning Precautions
Information IB03-08-S001
Vapor Chromed Finished Aluminum Wheels Exhibiting Surface Damage
ISSUE DATE: AUGUST, 2003
Affected Vehicles
2003-2004 Isuzu Axiom (UP)
Service Information
The following information on wheel care may be given to customers as needed.
Isuzu has found that some vehicles equipped with wheels that have been coated with a vapor chrome finish have exhibited surface damage from the use
of harsh chemicals and improper cleaning procedures. Though these wheels have the appearance of chrome plating, they have a painted surface similar to
the exterior of the vehicle, therefore, the same care should be used when cleaning and maintaining.
Recommended cleaning and maintenance for wheels with a vapor chrome finish:
^
Wash wheels when they are cool, in a shaded area away from direct sunlight.
^
Remove loose dirt with water spray. Wash wheels with mild or car wash soap using warm water.
^
Wash and dry wheels using 100% cotton terry cloth towel, chamois or a synthetic fabric designed for automotive detailing.
^
A fine bristle brush can be used sparingly for stubborn stains (Horse Hair Brush).
^
Apply automotive Carnuba wax according to manufacturers suggestions.
To avoid damaging wheels with a vapor chrome finish, DO NOT use any of the following types of cleaning agents:
^
Abrasive soaps, cleaners, household detergents and wheel/tire dressing.
^
Abrasive polishes, chrome polishes, chemicals and acid-based cleaners.
^
Abrasive cleaning brushes and steel wool.
^
Some automatic car washes may also cause damage to the vapor chrome finish.
^
Car wash chemical strength cleaners along with brush agitation could damage the finish.
NOTE:
Wheels that are found to be damaged by incorrect cleaning may be considered abuse and will not be covered by the vehicles basic limited warranty.
