Axiom 4WD V6-3.5L (2004)
![background image](/isuzu/axiom_4wd/v6-3.5l/Page-1266001.png)
Air Bag: Service and Repair
Driver Air Bag Assembly
Removal
1. Turn the steering wheel so that the vehicle's wheels are pointing straight ahead.
2. Turn the ignition switch to "LOCK".
3. Disconnect the battery "-" terminal cable, and wait at least 5 minutes.
4. Disconnect the yellow 2-way SRS connector located under the steering column.
5. Loosen the inflator module fixing bolt from behind the steering wheel assembly using a TORX driver or equivalent until the inflator module can
be released from steering assembly .
6. Disconnect the yellow 2-way SRS connector and horn lead located behind the inflator module.
7. Remove inflator module.
Inspection and Repair