Hombre S Regular Cab 2WD L4-2.2L CPC (1998)
Brake Master Cylinder: Service and Repair
Removal and Installation
REMOVAL PROCEDURE
1. Apply the parking brake.
2. Disconnect the brake pipes.
3. Plug the pipes in order to prevent brake fluid loss or contamination.
4. Remove the master cylinder nuts.
5. Remove the master cylinder.
INSTALLATION PROCEDURE
Before you install the master cylinder, bench bleed the master cylinder. Refer to Master Cylinder Bench Bleeding.
1. Install the master cylinder.
NOTICE: Refer to Fastener Notice in Cautions and Notices.