Hombre S Regular Cab 2WD L4-2.2L CPC (1998)
Clutch Plate And Hub Assembly Removal
Remove or Disconnect
1. Clamp the holding fixture J 41790 in a vise and attach compressor to holding fixture.
2. Keep the clutch hub and drive plate assembly from turning by using the clutch hub holding tool J 33027-A. Remove the compressor shaft nut using
a 13 mm socket (1).
3. Thread the Clutch Plate and Hub Assembly Remover J 33013-B into the hub. Hold the body of the remover with a wrench and turn the center
screw into the remover body to remove the clutch plate and hub assembly.
4. Remove the shaft key and retain for reassembly.
Tools Required
J 33013-B Hub and Drive Plate Installer
J 33027-A Clutch Hub Holding Tool
J 33017 Pulley and Bearing Assembly Installer
Shaft Key, Clutch Plate, And Hub Installation