Hombre S Regular Cab 2WD L4-2.2L CPC (1998)
2. Install the following parts:
2.1.
The O-ring on the vehicle speed sensor assembly
2.2.
The vehicle speed sensor assembly
2.3.
The bolt.
Tighten the bolt to 22 Nm (16 ft. lbs.).
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the electrical connector on the vehicle speed sensor assembly.
4. Remove the safety stands.
5. Lower the vehicle.
6. Connect the battery negative cable assembly to the battery negative terminal.
Tighten the bolt to 15 Nm (11 ft. lbs.).