Hombre S Regular Cab 4WD V6-4.3L (1999)
Speaker: Service and Repair
Speaker Replacement - Front
Removal Procedure
1. Remove the door trim panel.
2. Remove the radio front speaker grille.
3. Remove the radio front screws.
4. Remove the radio front speaker.
5. Disconnect the electrical connector.
Installation Procedure
1. Connect the electrical connector.
2. Install the radio front speaker.
NOTE: Refer to Fastener Note in Service Precautions.
3. Install the radio front speaker screws.
Tighten
Tighten the radio front speaker screws to 1.9 N.m (17 lb in).
4. Install the radio front speaker grille.
5. Install the radio front speaker grille screws.
Tighten
Tighten the radio front speaker grille screws to 1.9 N.m (17 lb in).
