Hombre S Regular Cab 4WD V6-4.3L (1999)
Front Door Weatherstrip: Service and Repair
Weatherstrip Replacement - Door Opening
Removal Procedure
1. Remove the door opening weather-strip from the door opening.
2. Pull the weather-strip from the pinch weld flange.
Installation Procedure
Perform the following steps in order to install the door opening weather-strip to the door opening:
1. Position the pre-formed corner of the weather-strip in the upper rear corner of the door opening.
2. Push the weather-strip onto the pinch weld flange.
Start at the preformed corner and work around the entire edge of the door opening.