Hombre S Regular Cab 4WD V6-4.3L (1999)
2. Pad the interior of the caliper with clean shop towels.
3. Remove the piston from the caliper bore.
4. Remove the boot from the caliper bore. Do not scratch the housing bore.
5. Remove the piston seal from the caliper bore. Do not use a metal tool.
6. Remove the bleeder valve from the caliper body.
7. Clean the bleeder valve, the caliper bore, the caliper passages and the piston with denatured alcohol. Dry the parts and blow out the brake
fluid passages. Use dry and filtered compressed air.
8. Replace the piston or the caliper if any of the following conditions exist:
-
Scoring on the piston surface or in the caliper bore
-
Corrosion on the piston