Hombre S Regular Cab 4WD V6-4.3L (1999)
Caution: Do not place your fingers in front of the piston in order to catch or protect the piston while applying compressed air. This
could result in serious injury.
Notice: Use just enough air pressure to ease the piston out of the bore. You can damage a blown-out piston even with the padding.
2. Pad the interior of the caliper with clean shop towels.
3. Remove the piston from the caliper bore.
4. Remove the boot from the caliper bore. Do not scratch the housing bore.
5. Remove the piston seal from the caliper bore. Do not use a metal tool.
6. Remove the bleeder valve and bleeder valve cap from the caliper body.
7. Remove the guide pins and guide pin sleeves from the anchor bracket.
8. Clean the following components with denatured alcohol.