Hombre S Regular Cab 4WD V6-4.3L (1999)
11. Remove the park brake strut and the strut spring.
12. Remove the park brake lever.
13. Remove the brake shoes.
14. Remove the adjusting screw assembly.
15. Remove the adjusting screw spring from the brake shoes.
16. Inspect all parts for discoloration due to heat or stress. Replace parts as needed.
17. Replace all worn parts.
18. Inspect the wheel cylinder for signs of leakage.
19. Inspect the brake drum for scoring and machining tolerance.
Refer to Brake Drum; Testing and Inspection; Procedures.
Installation Procedure
1. Lubricate the brake shoe backing plate, the adjusting screw threads, socket and socket face with a thin coat of white lithium grease or
equivalent.
Important: Do not interchange the right and left adjusting screws.
