Hombre S Regular Cab 4WD V6-4.3L (1999)
Wheel Cylinder: Service and Repair
Removal and Installation
Wheel Cylinder Replacement
Removal Procedure
1. Remove the brake shoes.
Refer to Brake Shoe; Service and Repair.
2. Disconnect the brake pipe.
3. Remove two bolts.
4. Remove the wheel cylinder.
Installation Procedure
1. Install the wheel cylinder.
2. Install the bolts.
Tighten
Tighten the bolts to 13 N.m (115 lb in).
3. Connect the brake pipe to the wheel cylinder.
Tighten
Tighten the brake pipe fitting to 21 N.m (16 lb ft).
4. Install the brake shoes.
Refer to Brake Shoe; Service and Repair.
5. Bleed the brake system.
Refer to Brake Bleeding; Service and Repair; Hydraulic System Bleeding.
