Hombre S Regular Cab 4WD V6-4.3L (1999)
2. Install new brass gaskets.
3. Install the front flex hose to caliper bolt.
Tighten
Tighten the bolt to 54 N.m (40 lb ft).
4. Install the brake pipe retainer.
5. Connect the brake pipe fitting.
Tighten
Tighten the brake pipe fittings to 17 N.m (13 lb ft).
6. Bleed the brakes.
7. Install the tire and wheel assembly.
8. Remove the safety stands and lower the vehicle.
Dual Piston Caliper
Brake Hose Replacement - Front (Dual Piston Caliper)
Removal Procedure
1. Raise and suitably support the vehicle.
2. Remove the tire and wheel assembly.
3. Clean the hose fittings at both ends. Remove all dirt, grease, and other foreign material.
