Hombre S Regular Cab 4WD V6-4.3L (1999)
2. Install new brass gaskets.
3. Install the front flex hose to caliper bolt.
Tighten
Tighten the bolt to 54 N.m (40 lb ft).
4. Install the ABS sensor wire bracket bolt.
Tighten
Tighten the bolt to 17 N.m (13 lb ft).
5. Install the front flex hose support clip bolt and the nut.
Tighten
Tighten the nut to 22 N.m (16 lb ft).
6. Install the brake pipe retainer.
7. Connect the brake pipe fitting.
Tighten
Tighten the brake pipe fitting to 17 N.m (13 lb ft).
8. Bleed the brakes.
9. Install the tire and wheel assembly.
10. Remove the safety stands and lower the vehicle.
Rear Brake Hose Replacement
