Hombre S Regular Cab 4WD V6-4.3L (1999)
4. Remove the seals.
5. Remove the spring.
6. Inspect the cylinder bore for scoring and corrosion.
7. Check the spring for discoloration caused by heat.
8. Replace parts as necessary.
9. Clean inside the cylinder bore with crocus cloth.
10. Clean the wheel cylinder bore with clean brake fluid.
11. Replace the wheel cylinder if scoring remains after the cleaning.
Assembly Procedure
1. Lubricate the seals and the wheel cylinder bore with clean brake fluid.
2. Install the spring.
3. Install the seals.