Hombre S Regular Cab 4WD V6-4.3L (1999)
Drive Belt Tensioner: Testing and Inspection
Drive belt Tensioner Diagnosis
Inspection Procedure
Important: When the engine is operating the drive belt tensioner arm will move. Do not replace the drive belt tensioner because of movement in
the drive belt tensioner arm.
Notice: Allowing the drive belt tensioner to snap into the free position may result in damage to the tensioner.
1. Remove the drive belt. Refer to Drive Belt - Service and Repair.
See: Drive Belt/Service and Repair
2. Position a 3/8 inch drive wrench on the drive belt tensioner arm and rotate the arm counterclockwise.
3. Move the drive belt tensioner through its full travel.
-
The movement should feel smooth
-
There should be no binding
-
The tensioner should return freely
4. If any binding is observed, replace the drive belt tensioner. Refer to drive belt Tensioner; Service and Repair.
See: Service and Repair
5. Install the drive belt. Refer to drive belt; Service and Repair.
See: Drive Belt/Service and Repair