Hombre S Regular Cab 4WD V6-4.3L (1999)
4. Install the compressor and condenser hose to the accumulator.
Tighten
Tighten the hose to 41 N.m (30 lb ft).
5. Install the sealing washers.
6. Install the compressor and condenser hose to the compressor.
7. Install the compressor and condenser hose washer and the bolt.
Tighten
Tighten the bolt to 33 N.m (24 lb ft).
8. Connect the battery negative cable.
9. Add refrigerant to the system.
10. Inspect the system for leaks.
Evaporator and Accumulator Hose
Evaporator and Accumulator Hose Assembly
Removal Procedure
CAUTION: Refer to Battery Disconnect Caution in Service Precautions.
1. Disconnect the negative battery cable.
2. Recover the refrigerant from the system.
3. Remove the evaporator and accumulator hose from the evaporator.
4. Remove the O-ring seal.