Hombre S Regular Cab 4WD V6-4.3L (1999)
Compressor Clutch Relay: Service and Repair
Removal Procedure
CAUTION: Refer to Battery Disconnect Caution in Service Precautions.
1. Disconnect the battery negative cable.
2. Remove the protective cover from the under hood junction block.
3. Remove the compressor relay from the under hood junction block.
Installation Procedure
1. Install the compressor relay to the under hood junction block.
2. Install the protective hood to the under hood junction block.
3. Connect the battery negative cable.
4. Test the circuit operation.
