Hombre S Regular Cab 4WD V6-4.3L (1999)
Oil Pressure Sender: Service and Repair
Engine Oil Pressure Sensor/Switch Replacement
Removal Procedure
Tools Required
-
J 41712 Oil Pressure Switch Socket.
1. Remove the distributor.
2. Disconnect the engine oil pressure gauge sensor electrical connector.
3. Hold the engine oil pressure gauge sensor fitting with a wrench.
4. Remove the engine oil pressure gauge sensor using the J 41712.
Important: Note the alignment of the engine oil pressure gauge sensor fitting prior to removal.
5. Remove the engine oil pressure gauge sensor fitting, it necessary.
Installation Procedure
Tools Required
-
J 41712 Oil Pressure Switch Socket.
