Hombre S Regular Cab 4WD V6-4.3L (1999)
Center Mounted Brake Lamp Bulb: Service and Repair
Removal Procedure
CAUTION: Refer to Battery Disconnect Caution in Service Precautions
1. Disconnect the battery negative cable.
2. Squeeze the release tabs in order to remove the dome lamp lens.
3. Remove the dome lamp bulb.
3. Remove the screws that retain the dome lamp base to the high mount stop lamp from inside the vehicle.
4. Remove the dome lamp base from the vehicle.
5. Disconnect the electrical connector.
6. Remove the high mount stop lamp from the vehicle.
Installation Procedure
1. Install the high mount stop lamp to the vehicle.
2. Connect the electrical connector.
3. Install the dome lamp base to the vehicle.
NOTE: Refer to Fastener Note in Service Precautions.
4. Install the screws that retain the dome lamp base to the high mount stop lamp from inside the vehicle.
Tighten
Tighten the screws to 2.5 N.m (22 lb in).
5. Install the dome lamp bulb.
