Hombre S Regular Cab 4WD V6-4.3L (1999)
Glove Box Lamp: Service and Repair
Removal Procedure
1. Remove the instrument panel storage compartment bezel.
2. Disconnect the electrical connector from the lamp and switch assembly.
3. Remove the lamp and switch assembly from the instrument panel storage compartment bezel. Release the lock tabs and push out on the lamp and
switch assembly.
4. Remove the bulb from the lamp and switch assembly.
Installation Procedure
1. Install the bulb to the lamp and switch assembly.
2. Install the lamp and switch assembly.
3. Connect the electrical connector to the lamp and switch assembly.
4. Install the instrument panel storage compartment bezel.
