Hombre S Regular Cab 4WD V6-4.3L (1999)
Headlamp Bulb: Service and Repair
Removal Procedure
CAUTION: Halogen bulbs contain gas under pressure. Handling a bulb improperly could cause it to shatter into flying glass fragments. To help avoid
personal injury:
-
Turn OFF the lamp switch and allow the bulb to cool before changing the bulb. Leave the lamp switch OFF until the bulb change is complete.
-
Always wear eye protection when changing a halogen bulb.
-
Handle the bulb only by its base. Avoid touching the glass.
-
Do not drop or scratch the bulb.
-
Keep dirt and moisture OFF the bulb.
-
Place the used bulb in the new bulb's carton and dispose of it properly. Keep halogen bulbs out of the reach of children
1. Turn the red locking tab upward to the UNLOCK position. as noted on the rear of the headlamp.
2. Pull forward on the headlamp in order to release the headlamp from the upper retainer.
3. Pull up on the headlamp in order to release the headlamp from the lower retainers.
4. Remove the bulb from the headlamp. Push in and rotate the bulb 1/4 turn counter-clockwise.
Installation Procedure