Hombre S Regular Cab 4WD V6-4.3L (1999)
Tail Lamp: Service and Repair
Removal Procedure
CAUTION: Refer to Battery Disconnect Caution in Service Precautions.
1. Disconnect the battery negative cable.
2. Turn the headlamp switch OFF.
3. Turn the ignition to LOCK.
4. Lower the tailgate.
5. Remove the screws that retain the tail lamp assembly to the vehicle.
6. Remove the tail lamp assembly.
7. Rotate the bulb sockets 1/4 turn counter-clockwise in order to remove the bulb sockets from the tail lamp assembly.
8. Remove the bulbs from the sockets.
Installation Procedure
1. Install the bulbs into the sockets.
2. Install the bulb sockets to the tail lamp assembly by rotating the sockets 1/4 turn clockwise.
3. Install the tail lamp assembly to the vehicle.
NOTE: Refer to Fastener Note in Service Precautions.
4. Install the screws that retain the tail lamp assembly to the vehicle.
Tighten