Hombre S Regular Cab 4WD V6-4.3L (1999)
Power Steering Line/Hose: Service and Repair
Power Steering Return Hose Replacement
Power Steering Return Hose Replacement (4.3L)
Removal Procedure
Notice: Do not start the vehicle with any power steering gear inlet or outlet hoses disconnected. When disconnected, plug or cap all openings of
components. Failure to do so could result in contamination or loss of power steering fluid and damage to the system.
1. Raise and suitably support the vehicle.
2. Remove the steering Linkage shield, if equipped.
3. Install drain pan under vehicle.
4. Disconnect the return hose from the power steering pump.
5. Lower the vehicle.
6. Remove the air cleaner assembly.
7. Disconnect the power steering gear return hose from the power steering gear.
8. Remove the power steering gear return hose from the vehicle.
Installation Procedure
Notice: The inlet and outlet hoses must not be twisted during installation. Do not bend or distort the inlet or outlet hoses to make installation easier.
Failure to follow these procedures could result in component damage.
1. Install the power steering gear return hose to the vehicle.