Hombre S Regular Cab 4WD V6-4.3L (1999)
8. Use a grease pencil in order to note the position of the rotor in relation to the distributor housing (1).
9. Mark the distributor housing and the intake manifold with a grease pencil.
10. Remove the mounting clamp hold down bolt.
11. Remove the distributor.
12. As the distributor is being removed from the engine, watch the rotor move in a counter-clockwise direction about 42 degrees.
This will appear as slightly more than one clock position.
13. Note the position of the rotor segment.
14. Place a second(2) mark on the base of the distributor.
This will aid in achieving proper rotor alignment during the distributor installation.
Installation Procedure 1
