Hombre S Regular Cab 4WD V6-4.3L (1999)
9. Remove the wheel speed sensor mounting bolt from the wheel hub and bearing assembly.
10. Remove the wheel speed sensor from the wheel hub and bearing assembly.
11. Remove the wheel hub and bearing assembly to the steering knuckle mounting bolts.
Important: Lay the wheel hub and bearing assembly on the hub bolts on the outboard side. This prevents damage or contamination to the bearing
seal.
12. Remove the wheel hub and bearing assembly to the steering knuckle.
13. Remove the splash shield from the steering knuckle.
14. Remove the wheel hub and bearing seal from the wheel hub and bearing assembly.
Installation Procedure
1. Install the wheel hub and bearing seal to the wheel hub and bearing assembly.
