Hombre S Regular Cab 4WD V6-4.3L (1999)
-
The radio
-
The power windows
The number of seconds displayed refers to the amount of time left before the BCM will turn OFF the RAP relay. The BCM uses the data in order to
control the power to the RAP circuit.
Courtesy Lamp Timer
Range: 0 - 40 seconds
The BCM uses the courtesy lamp timer in order to control the devices that attach to the following circuits:
-
Illuminated entry - The courtesy lamps will turn ON when you enter the vehicle. The lamps will stay ON for 15 seconds or until the ignition
switch is turned to the ON position.
-
Exit lighting - The courtesy lamps will turn ON when the key is removed from the ignition switch. The lamps will remain ON for 40 seconds. The
number of seconds displayed refers to the amount of time left before the BCM turns the courtesy lamp relay OFF
Input I
Ignition I
Range: ACTIVE/INACTIVE
The BCM uses the Ignition 1 data in order to determine the position of the ignition switch.
ACTIVE is displayed when the ignition switch is in the RUN or CRANK position.
INACTIVE is displayed when the ignition switch is not in the RUN or CRANK position.
Ignition 3
Range: ACTIVE/INACTIVE
The BCM uses the Ignition 1 data in order to determine the position of the ignition switch.
ACTIVE is displayed when the ignition switch is in the RUN position.
INACTIVE is displayed when the ignition switch is not in the RUN position.
Ignition Power Mode
Range: OFF/RUN/CRANK/UNKNOWN
The BCM uses the ignition power mode data in order to determine the position of the ignition switch.
OFF is displayed when the ignition switch is in the OFF or the ACCESSORY positions.
RUN is displayed when the switch is in the RUN position.
CRANK is displayed when the ignition switch is in the CRANK position.
UNKNOWN is displayed when the BCM cannot determine the position of the ignition switch (i.e. between the OFF and the RUN position).
Door Handle Switch
Range: ACTIVE/INACTIVE
The door handle switch information refers to the position of either of the door handles (outside or inside). The information is used by the BCM for the
illuminated entry feature.
ACTIVE is displayed when either of the handles is raised.
INACTIVE is displayed when neither of the front door handles is raised. The right front door jamb switch is also on the circuit.
ACTIVE is displayed when the right front door is opened.
INACTIVE is displayed when the right front door is completely closed.
Driver Door Jamb Switch
Range: ACTIVE/INACTIVE
