Hombre S Regular Cab 4WD V6-4.3L (1999)
1. IMPORTANT: Do not reuse the original O-ring.
Replace the CKP sensor O-ring.
2. Lubricate the O-ring with clean engine oil before installing the CKP sensor.
3. IMPORTANT: Make sure the CKP sensor mounting surface is clean and free of burrs.
Install the CKP sensor.
4. NOTE: Refer to Fastener Note in Service Precautions.
Install the CKP sensor mounting bolt.
Tighten
Tighten the CKP sensor mounting bolt to 20 N.m (15 lb ft).
