Hombre S Regular Cab 4WD V6-4.3L (1999)
Fuel Level Sensor: Service and Repair
REMOVAL
Tools Required
-
J 34730-1A Fuel Pressure Gauge
-
J 39765 Fuel Sender Lock Nut Wrench
1. CAUTION: Refer to Battery Disconnect Caution in Service Precautions.
Disconnect the negative battery cable.
2. Relieve the fuel system pressure.
3. Drain the fuel tank.
4. Remove the fuel tank.
5. Remove the fuel sender assembly.
6. Disconnect the fuel pump electrical connector (5).
7. Remove the fuel level sensor electrical connector retaining clip(6).
8. Disconnect the fuel level sensor electrical connector (7) from under the fuel sender cover.
9. Remove the fuel level sensor retaining clip (4).
10. Squeeze the locking tangs and remove the fuel level sensor (3).
INSTALLATION