Hombre S Regular Cab 4WD V6-4.3L (1999)
Complete one of the following actions in order to return the BCM to normal operation when the battery run down protection turns OFF the interior
lamps:
-
Turn OFF all of the lamps and close all of the doors.
-
Turn the ignition switch from the OFF position to the ON position.
Inadvertent Power Relay
The BCM turns OFF the inadvertent power relay after 20 minutes in order to preserve the battery power.
The 20 minute timer starts after any one of the following actions occurs:
-
The ignition switch is turned from RUN or START to UNLOCK, LOCK or ACC.
-
The illuminated entry is activated.
-
The interior lamps switch is turned ON.
-
The underhood lamp is activated.
-
The vanity lamp is activated.
-
The courtesy lamp is activated.
-
The dome lamp is activated.
-
The glove compartment lamp is activated.
-
The inside rear view mirror lamp is activated.
If any one of the following inputs reoccur during the 20 minute timer period, the timer is reset to 20 minutes:
-
The ignition switch is turned from RUN or START to UNLOCK, LOCK or ACC.
-
The illuminated entry is activated.
-
The interior lamps switch is turned ON.
-
The courtesy lamp is activated.
-
The dome lamp is activated.
Retained Accessory Power (RAP)
The RAP feature allows the following components to be operated after the ignition switch is turned from the RUN position to the LOCK position:
-
The power windows
-
The entertainment system
The RAP operates if the vehicle battery voltage is above the minimum voltage threshold when the ignition switch is in the OFF position.
The above components will be turned OFF when either of the following actions occurs:
-
A door is opened.
-
20 minutes elapses without an ignition switch transition.
Illuminated Entry
The interior lights will illuminate for 15 seconds if any of the following actions occurs:
-
Open and close the driver side door.
-
Open and close the passenger side door.
Interior Illumination
The interior lights will illuminate continuously if the following occurs:
-
The interior light defeat button is OFF and any door is opened.
-
The dimmer switch is rotated to the ON position for interior illumination.
Exit Lighting
The interior lights will illuminate for 40 seconds when the ignition key is removed from the ignition cylinder.
Power Door Lock/Unlock Function
The BCM is responsible for energizing the driver door unlock relay. The driver door unlock relay is energized whenever the BCM receives a command
from any of the DOOR LOCK/UNLOCK switches and an input from the RFA module on the RFA serial data line.
Door Lock/Unlock Switch Function
The driver door LOCK/UNLOCK switch and the passenger door LOCK/UNLOCK switch are inputs to the BCM. The BCM will command the driver
door unlock relay to unlock the drivers door according to the state of the relevant switch.
