Hombre S Regular Cab 4WD V6-4.3L (1999)
Throttle Position Sensor: Testing and Inspection
TP Sensor Output
This check should be performed when TP sensor attaching parts have been replaced. A scan tool can be used to read the TP signal output voltage.
1. Connect digital voltmeter J 39200 from TP sensor connector terminal B (BLK wire) to terminal Cycles if (DK Blue wire). Jumpers for terminal
access can be made using terminals 1214836 and 12014837.
2. With ignition ON, engine stopped, the TP signal voltage should be less than 1.25 V if more than 1.25 V verify free throttle movement. If still more
than 1.25 V, replace TP sensor.
3. Remove the voltmeter and jumpers, reconnect the TP sensor connector to the sensor.
