Hombre S Regular Cab 4WD V6-4.3L (1999)
1. Place the accelerator pedal assembly over the mounting studs and onto the mounting surface.
2. NOTE: Refer to Fastener Note in Service Precautions.
Install the accelerator pedal mounting nuts.
Tighten
Tighten the accelerator pedal mounting nuts to 9 N.m (84 lb in).
3. Lift upward on the accelerator pedal.
4. Insert the cable through the pedal lever slot.
5. Press the retainer into the lever hole until fully seated.
6. IMPORTANT: The pedal must operate freely without binding through the full range of pedal movement.
Check the accelerator pedal for free movement by depressing and releasing the pedal several times.
