Hombre S Regular Cab 4WD V6-4.3L (1999)
13.
Obtain the J41413, close the valve (2) on the tank, and remove the regulator assembly (see figure 5).
14.
Install the J44466-10 (5) to the J41413 tank (3). The J44466-10 regulator is preset to 150 psi (see figure 5).
15.
Connect the J44466-10 hose (1) to the J44466-12 (3) (see figure 6).
16.
Install the J39021 Injector/Coil Balance Tester, the J39021-210 Injector Tester Adapter Box, and J39021-301 V6 Fuel Injector Test Adapter (1)
or J 9021-302 V8 Fuel Injector Test Adapter to the metering body electrical connector (see figure 6).
17.
Adjust the amperage selector switch on J39021 to 0.5 amps (see figure 6).