Hombre S Regular Cab 4WD V6-4.3L (1999)
1. Lubricate the new injector O-ring seals with clean engine oil (2).
2. Install the O-rings on the injector assembly (2).
3. Assemble the Central SFI fuel injector assembly into the fuel meter Body injector socket.
4. NOTE: Refer to Fastener Note in Service Precautions.
Assemble the lower hold down plate and nuts (1).
Tighten
Tighten the nuts to 3.0 N.m (27 lb in).
INSTALLATION
1. Install the fuel meter Body assembly.
2. Install the upper manifold assembly.
3. Connect the negative battery cable.
