isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Fuel Pressure Regulator > < Fuel Meter Body|Service and Repair|Page 3352
Page 4
background image

Tighten the fuel pipe nuts to 30.0 N.m (22 lb ft).

11. Inspect for fuel leaks.

1. Connect the negative battery cable.
2. Turn ON the ignition switch for 2 seconds.
3. Turn the ignition switch to the OFF position for 10 seconds.
4. Turn the ignition switch back to the ON position.
5. Check for fuel leaks.

12. Tighten the fuel filler cap.

Fuel Pressure Regulator > < Fuel Meter Body|Service and Repair|Page 3352