Hombre S Regular Cab 4WD V6-4.3L (1999)
Tighten
Tighten the air cleaner outlet duct clamp to 4 N.m (35 lb in).
14. Connect the breather tube to the air cleaner outlet duct.
15. Connect the IAT sensor harness connector.
16. Connect the negative battery cable.
17. IMPORTANT: The accelerator pedal should operate freely without binding between closed and wide open throttle.
Check the accelerator pedal operation.
1. Turn ON the ignition leaving the engine OFF.
2. Using a scan tool, observe the parameter for the TP sensor
3. Depress the accelerator pedal to the floor.
4. Release the accelerator pedal.
5. Verify the throttle position has gone from 0% to 100% and back to 0%.