isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Throttle Cable/Linkage|Description and Operation|Page 3463 > < Throttle Body|Removal and Installation|Page 3459
Page 1
background image

Throttle Cable/Linkage: Description and Operation

Accelerator Controls

The accelerator control system is a cable type and there are no linkage adjustments. Therefore, the only specific cable for each application must be used.
When work has been performed on the accelerator controls, always make sure that all components are installed correctly and that the linkage and cables
are not rubbing or binding in any manner. The throttle should operate freely without binding between full closed and wide open throttle.

Throttle Cable/Linkage|Description and Operation|Page 3463 > < Throttle Body|Removal and Installation|Page 3459