Hombre S Regular Cab 4WD V6-4.3L (1999)
IMPORTANT: Do not use the old cap3 CMP sensor, and rotor screws. Use replacement screws that have been coated with a thread locking compound.
Precoated replacement cap and CMP sensor screws can be acquired using GM P/N 10475922 (pkg of 10 screws). Precoated replacement rotor screws
can be acquired using GM P/N 10475924 (pkg of 10 screws).
1. NOTE: Refer to Fastener Note in Service Precautions.
Install the knock sensor.
Tighten
Tighten the sensor to 20 N.m (15 lb ft)
2. Connect the knock sensor harness connector.