Hombre S Regular Cab 4WD V6-4.3L (1999)
5. Install the distributor rotor according to the index marks.
6. Install two rotor hold down screws.
Tighten
Tighten the screws to 2.2 N.m (20 lb in).
NOTE: Refer to Distributor Driven Gear Can Be Installed in Multiple Positions in Service Precautions.
7. Install the round washer (1), 7.4L engine only.
8. Install the tang washer over the bottom of the distributor shaft.
9. Install the round washer.
10. Install the driven gear according to the index marks.
