Hombre S Regular Cab 4WD V6-4.3L (1999)
4. Install the connector position assurance (CPA) to the SDM harness connector.
5. Position the carpet to cover the supplemental restraint sensing and diagnostic module (SDM).
6. Install the LH kick panel. Refer to LH KICK PANEL.
7. Install the floor console (if equipped), Refer to FLOOR CONSOLE REPLACEMENT in Instrument Panel, Gauges and Console.
8. Install the LH carpet retaining sill trim molding. Refer to Door Sill Plate Replacement in Interior Trim.
9. Install driver seat belt to floor. Refer to Seat Belt Replacement - Front.
10. Install the driver seat. Refer to FRONT SEAT REPLACEMENT in Seats.
11. Enable the SRS. Refer to Enabling the SRS.
